Winterizing Your Swimming Pool
Once fall ends and winter begins to rear it’s ugly head, it will be time to shut your pool down. When shutting your pool down, the first step will be the water. You should begin by checking your pH level, and making sure that it is around 7.5. If it isn’t, simply add some dry acid. You should also check your chlorine as well, and use a winterizing product to make sure that your pool will be protected from algae during the few months that you won’t be swimming.
During the winter months, you should run your pump for around 6 hours a day, to ensure that the algae doesn’t settle in. You should also go ahead and check for any types of leaks as well, then switch your skimmer valve off and let the water drain to around 6 inches below the skimmer’s bottom. This way, you’ll have the preferred amount of water in your pool.
If you are using a summer cover, take it down and give it a good cleaning using fresh water and a pressure washer if you have access to one. Once you have cleaned the cover really good, go ahead and put it in your building or garage and break out your winter cover. When you put your winter cover on the pool, make sure that you have plenty of tension on the cover, to prevent anything from getting under it.
Although you may have put the cover on tight, you should still check it every couple of days to make sure that it is still tight. Remind your family and friends that you have closed your pool down for the winter, and that they shouldn’t be around it. Pool covers are designed to protect your pool and the water – they aren’t made for safety. Never, under any circumstances should you let a pet or a person on the cover.
(more…)
by admin on June 14th, 2010 Tags: Winterizing Your Swimming Pool
Posted in Swimming Pools | No Comments »